This access point is the second in a series of three that we stock from Senao. This one, the 3220-16 with built in 16dBi antenna has PoE, supports WDS and secure access (WEP/WPA) and many of the usual features you would expect from an AP. The 3220 - 16dBi comes with mounting bracket, earthing cable and PoE injector unit. This access point is similar to the 9dBi variant however the extra gain provides extra range and makes this unit ideal for highly focussed WiFi applications or point to point linking of two buildings.
We have deployed these access points in many locations and have not had any problems. Setup is simple through a web interface and all main features are supported. The unit can act as a bridge, access point or client.
Manufacturer’s Description
26dbm Wireless Outdoor Multi-Client Bridge/AP/ WDS 2.4GHz
The Outdoor Wireless Multi-Client Bridge/Access Point/ WDS (wireless distribution system) operates seamlessly in the 2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps) and the newer, faster 802.11g (2.4GHz, 54Mbps) wireless standards. It's the best way to add wireless capability to your existing wired network, or to add bandwidth to your wireless installation. Four, user configurable, power levels allow up to 26dB. Please note: The power level should be adjusted so as to stay within the legal EIRP limits).
To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also supports WPA/WPA2. The MAC address filter lets you select exactly which stations should have access to your network. With the Wireless Multi-Client Bridge/Access Point/WDS, you'll experience the best wireless connectivity available today. Built in 16dBi Panel Antenna.
Technical Specification
Data Rates 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps
Standards IEEE802.11b/g, IEEE802.1x, IEEE802.3, IEEE802.3u
Compatibility IEEE 802.11g/ IEEE 802.11b
Power Requirements Active Ethernet (Power over Ethernet) -48 VDC/0.7A
External Unit: Auto sensing 100/240 VAC; 50/60 Hz
Regulation Certifications FCC Part 15/UL, ETSI 300/328/CE
Frequency Band 2.400~2.484 GHz
Media Access Protocol Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA)
Modulation Technology Orthogonal Frequency Division Multiplexing (OFDM)
DBPSK @ 1Mbps
DQPSK @2Mbps
CCK @ 5.5 & 11Mbps
BPSK @ 6 and 9 Mbps
QPSK @ 12 and 18 Mbps
16-QAM @ 24 and 36 Mbps
64-QAM @ 48 and 54 Mbps
Operating Channels 11 for North America, 14 for Japan, 13 for Europe,
Available transmit power(Typical) 25dBm Min. @1, 2, 5.5 and 11Mbps
23dBm Min. @6, 9, 12, 18Mbps
22dBm Min. @24, 36Mbps
21dBm Min. @48, 54Mbps
11b mode, RF power set on 20dBm.
11g mode, RF power from 20dBm up to 26dBm.
Default mode: 11b/g RF power set on 20dBm
RF Connector 16dB panel antenna included
Antenna beamwidth 30 degrees horizontal and vertical
Topology Ad-Hoc, Infrastructure
Operation Mode Point-to-Point/ Point-to-Multipoint Bridge/ AP/ Client Bridge/ WDS
Interface One 10/100Mbps RJ-45 LAN Port
Security IEEE802.1x authenticator / RADIUS client (EAP-MD5/TLS/TTLS) support in AP mode
WPA2/WPA/ Pre Share KEY (PSK)/ TKIP/ AES
MAC address filtering
Hide SSID in beacons
IP Auto-configuration DHCP client/server
Configuration Web-based configuration (HTTP)
Telnet configuration
SNMP V1(MIBI, MIBII)
Firmware Upgrade Upgrade firmware via web-browser
Serial Interface (RS-232)
TFTP
Dimensions 19.8cm x 19.8cm x 7.5cm
Weight 1.4 Kg (2.8 lbs)
Temperature Range Operating: -20C to 60C (-4F to 140F)
Storage: -40C to 80C (-40F to 176F)
Humidity (non-condensing) 5%~95% Typical
