Zyxel Hi Speed Powerline Homeplug Double

This is a pair of PLA-401S units allowing you to create a network link between two points.
This Zyxel PLA401 is a brilliant product. If you have not used Ethernet over Powerline systems before then you will love this. Simply plug one PLA401 into a 13A socket near your router/switch and connect the Ethernet cable. Then more or less anywhere in the house that you have a 13A socket you will be able plug in the other PLA401 and connect to your network. (As long as the power circuit is on the same phase – which in a house it normally is)

Manufacturer’s Description

• Data Transmission Rates of Up to 200Mbps
• HomePlug instant Encrypt button to secure your powerline network
• Multi-coloured LED to indicate data transmission rates over powerline
• Advanced 128-bit AES Network Security
• No Wiring and Cabling Required
• Simple Direct Plug Design

PLUG and PLAY setup
With Zyxel’s PLA Series, your home powerline network is just a few steps away. Plug at least a pair of PLAs into house power outlets, connect a PLA to your computer and the other to the modem or router for Internet access, there's no software to install. It's that easy to access the Internet from your home computer through the powerline.

Data Transmission Rates of Up to 200Mbps
Zyxel’s Powerline Series is an access extension solution to completely network your house with existing power lines. Thanks to the advanced HomePlug AV technology, the PLA401 v2 is capable of transmitting data at up to 200Mbps. It allows you to share network resources and enjoy Internet access through secure high-speed data connections over the house power lines you already have.

High Speed and QoS for High Definition Video Streams
The inherent advanced QoS features of HomePlug AV Series are ideal for service provider to deliver "triple play" multimedia services such as high-quality digital video streams, high-speed Internet access, as well as voice services.

Advanced 128-bit AES Security Protection
With the 128-bit Data Encryption Security (AES) feature, the PLA401 v2 provides secure network connection for Internet access and network resource sharing. You may sit back to enjoy fast Internet surfing experience and secure file transfer while leaving the hassles to the PLA401 v2.

Technical Specification

Network Standard: HomePlug AV 200Mbps compliance Data Rate
Power Line Network: Supports up to 16 (Tone Map) Powerline devices communicating on a single network. Each Powerline Ethernet adapter supports 15 remote Ethernet addresses. With total 4 groups then it can support up to total 64.
Modulation: OFDM Symbol Modulation, Supports QAM 1024/256/64/16, DQPSK, DBPSK and ROBO Carrier modulation schemes
Frequency Band: 1.7 MHZ ~30MHZ
Coverage Area: up to 300 meters
Security: 128 bit AES encryption
Interface: One RJ-45 Ethernet Port
One Power Input: 100-240VAC, 50/60Hz
Plug type: EU, US, UK

LED Display on Top-Case
PWR: Power-Light
LINK: Power-Line Link/ACT and Throughout Indicator
ETHN: Network Connected/ Non-Connected

Buttons
Encryption Button
Reset Button

Dimensions: 75(W) x 97(D) x 45(H) mm Weight: 160g
Operation Environment: Temperature: 0°C ~ 40°C
Humidity: 20% ~ 80%
Safety: UL/cUL, CB
EMI: CE, FCC part 15B
HomePlug Certification: HomePlugAVThis device is the single PLA-401S allowing you to add to an existing network. You could buy two of these but it’s cheaper to go for the dual pack PLA-401D in this section.
This Zyxel PLA-401S is a brilliant product. If you have not used Ethernet over Powerline systems before then you will love this. Simply plug one PLA-401S into a 13A socket near your router/switch and connect the Ethernet cable. Then more or less anywhere in the house that you have a 13A socket you will be able plug in the other PLA401 and connect to your network. (As long as the power circuit is on the same phase – which in a house it normally is)

Manufacturer’s Description

• Data Transmission Rates of Up to 200Mbps
• HomePlug instant Encrypt button to secure your powerline network
• Multi-coloured LED to indicate data transmission rates over powerline
• Advanced 128-bit AES Network Security
• No Wiring and Cabling Required
• Simple Direct Plug Design

PLUG and PLAY setup
With Zyxel’s PLA Series, your home powerline network is just a few steps away. Plug at least a pair of PLAs into house power outlets, connect a PLA to your computer and the other to the modem or router for Internet access, there's no software to install. It's that easy to access the Internet from your home computer through the powerline.

Data Transmission Rates of Up to 200Mbps
Zyxel’s Powerline Series is an access extension solution to completely network your house with existing power lines. Thanks to the advanced HomePlug AV technology, the PLA401 v2 is capable of transmitting data at up to 200Mbps. It allows you to share network resources and enjoy Internet access through secure high-speed data connections over the house power lines you already have.

High Speed and QoS for High Definition Video Streams
The inherent advanced QoS features of HomePlug AV Series are ideal for service provider to deliver "triple play" multimedia services such as high-quality digital video streams, high-speed Internet access, as well as voice services.

Advanced 128-bit AES Security Protection
With the 128-bit Data Encryption Security (AES) feature, the PLA401 v2 provides secure network connection for Internet access and network resource sharing. You may sit back to enjoy fast Internet surfing experience and secure file transfer while leaving the hassles to the PLA401 v2.

Technical Specification

Network Standard: HomePlug AV 200Mbps compliance Data Rate
Power Line Network: Supports up to 16 (Tone Map) Powerline devices communicating on a single network. Each Powerline Ethernet adapter supports 15 remote Ethernet addresses. With total 4 groups then it can support up to total 64.
Modulation: OFDM Symbol Modulation, Supports QAM 1024/256/64/16, DQPSK, DBPSK and ROBO Carrier modulation schemes
Frequency Band: 1.7 MHZ ~30MHZ
Coverage Area: up to 300 meters
Security: 128 bit AES encryption
Interface: One RJ-45 Ethernet Port
One Power Input: 100-240VAC, 50/60Hz
Plug type: EU, US, UK

LED Display on Top-Case
PWR: Power-Light
LINK: Power-Line Link/ACT and Throughout Indicator
ETHN: Network Connected/ Non-Connected

Buttons
Encryption Button
Reset Button

Dimensions: 75(W) x 97(D) x 45(H) mm Weight: 160g
Operation Environment: Temperature: 0°C ~ 40°C
Humidity: 20% ~ 80%
Safety: UL/cUL, CB
EMI: CE, FCC part 15B
HomePlug Certification: HomePlugAV